Planetary gearboxes in flange sizes from 42 mm to 142 mm, ratios 3 to 200, IP54. SPN planetary gearboxes available on demand. Request a quote for pricing and availability.
Send us your requirement and we will reply with pricing and availability.
Call +92 333 4791957Chat on WhatsAppEmail info@mvpowerdrive.comMV Power Drive supplies planetary gearboxes in Pakistan for servo and stepper motor applications that need precise positioning and low backlash. The range covers five flange sizes from 42 mm to 142 mm and a wide choice of ratios from 3 to 200. Straight and right angle versions are available, and SPN planetary gearboxes can be supplied on demand.
| Parameter | Value |
|---|---|
| Flange sizes | 42, 60, 80, 115 and 142 mm |
| Ratio range | 3 to 200 |
| Stages | One or two stages |
| Maximum input speed | 10,000 rpm |
| Backlash, stage 1 (ratio 3 to 20) | P2 up to 16 arcmin |
| Backlash, stage 2 (ratio 15 to 200) | Up to 18 arcmin |
| Noise level | Up to 73 dB |
| Protection class | IP54 |
| Life span | 10,000 hours |
| Versions | Straight and right angle |
These planetary gearboxes suit any machine where a servo or stepper motor needs more torque at a lower speed without losing positioning accuracy. They are used across automation, robotics, heavy industry, light industry and process plants, including the following sectors.
Servo axes in automated machines and industrial robots use planetary gearboxes to raise torque and keep movement accurate and repeatable.
Positioning, feeding and handling equipment in metal processing and mining operations uses compact, high torque gearing on servo drives.
Winding, feeding and tension control axes on textile machinery benefit from smooth, low backlash drive. See our textile industry solutions for the full range of drives and gear motors we supply.
Filling, dosing, cutting and wrapping machines use servo axes where repeatable movement matters. Confirm the required protection class for washdown areas before ordering, as these units are rated IP54.
Plastic processing equipment and light industry production lines use planetary gearboxes for precise feed, take off and indexing movements.
Conveyors, sorting units, lifting and transportation equipment, and automated car parking systems use them to match motor speed to the load.
Assembly, handling and positioning stations in automobile manufacturing use servo driven axes with planetary gearboxes.
Ceramic production lines and environmental protection equipment use them in drive axes that need controlled speed and torque.
Looking for gearboxes for another industry? Tell us about your machine and we will recommend the right model.
The range covers flange sizes of 42, 60, 80, 115 and 142 mm, with ratios from 3 to 200 in one or two stages.
Single stage units (ratio 3 to 20) offer P2 backlash up to 16 arcmin. Two stage units (ratio 15 to 200) offer backlash up to 18 arcmin.
Yes, they are built for servo and stepper motor applications. Send us your motor model, frame size and shaft diameter and we will confirm the right gearbox.
Yes, both straight and right angle versions are available.
SPN planetary gearboxes are available on demand. Contact us with your requirement.
Send the motor model or frame size, shaft diameter, required ratio, mounting type and a short description of the application. We will reply with the right model, pricing and availability.
Yes. MV Power Drive supplies from Lahore to customers across Pakistan.
Industrial drives, motors and gearboxes supplied to customers across Pakistan.
Send your motor and application details and we will confirm the right model.
Pricing and availability are confirmed against your exact requirement.
See how our products are used in your industry. Each page shows the machines, the right products and typical selection advice.







Send us your motor details, ratio and mounting. We will recommend the right unit and send a quote.