NMRV gearbox prices in Pakistan start from Rs 28,000 for the smallest NMRV 025 and go up to about Rs 7 lakh (Rs 700,000) for a cast iron NMRV 150. Where a unit lands inside that spread depends on the body size, the ratio, the input flange and, above all, whether it is a documented branded unit or an unbranded import.
Below is the full price range for every size MV Power Drive supplies, plus what pushes a price up or down and how to get a firm quote the same day.
NMRV Gearbox Price List by Size
These are gearbox only prices for a standard single reduction unit. The starting figure is the entry price for the size, and the range shows where most orders fall. Prices were last updated in October 2026.
| Model | Starting from | Typical price range | Common use |
|---|---|---|---|
| NMRV 025 | Rs 28,000 | Rs 28,000 to Rs 45,000 | Small automation, light indexing |
| NMRV 030 | Rs 30,000 | Rs 30,000 to Rs 50,000 | Packaging, dosing, small conveyors |
| NMRV 040 | Rs 34,000 | Rs 34,000 to Rs 65,000 | Packaging lines, food machinery |
| NMRV 050 | Rs 40,000 | Rs 40,000 to Rs 85,000 | Light conveyors, mixers |
| NMRV 063 | Rs 48,000 | Rs 48,000 to Rs 1,20,000 | Conveyors, general production |
| NMRV 075 | Rs 62,000 | Rs 62,000 to Rs 1,60,000 | Standard conveyors, mid size mixers |
| NMRV 090 | Rs 85,000 | Rs 85,000 to Rs 2,30,000 | Heavier mixers, continuous duty |
| NMRV 110 | Rs 1,30,000 | Rs 1,30,000 to Rs 3,50,000 | Heavy duty, high inertia loads |
| NMRV 130 | Rs 2,00,000 | Rs 2,00,000 to Rs 5,20,000 | Heavy mixers, crushers, feeders |
| NMRV 150 | Rs 3,00,000 | Rs 3,00,000 to Rs 7,00,000 | The largest single stage duty |
Prices are shown in Pakistani rupees and use the lakh format that most buyers here are used to, so Rs 1,20,000 means one lakh twenty thousand. For a size by size breakdown of torque and ratio, see our NMRV worm gearbox size guide.
What Affects the Price of an NMRV Gearbox
Two buyers can ask for an “NMRV 075” and receive quotes that are far apart. That is normal, and it usually comes down to five things.
- Body size. Every step up in size adds more material, a larger worm wheel and a heavier housing, so the price climbs quickly from 090 upward.
- Housing material. The smaller sizes use die cast aluminium. From NMRV 110 upward the housing is cast iron, which is heavier and costs more to produce.
- Ratio and construction. A standard single reduction unit costs less than a double reduction unit built to reach a very high ratio.
- Input flange and output shaft. A common flange in stock is cheaper than a special bore, a double output shaft or a torque arm.
- Brand and documentation. A unit with a proper torque rating on its datasheet costs more than an unbranded import with no paperwork, and the gap shows up later in service life.
Why the Cheapest NMRV Is Not Always the Cheapest Option
A low quote is tempting, but a worm gearbox is a wearing part. The bronze worm wheel is the component that pays for a bad size choice or a weak build, and a failed gearbox means a stopped line and a rushed replacement at a higher price.
Two suppliers quoting the same size and ratio are also not automatically quoting the same product. Gear material, housing casting and tolerances vary between makers. Ask for the torque rating at your ratio in writing, and compare that number, not just the model name. If you are still unsure which size your load needs, our guide on electric motor selection for conveyor systems shows how the load side of the calculation works.
Need a Combination or a Custom Configuration?
Prices for complete NMRV combinations and special configurations depend on the exact specification. Contact MV Power Drive with the size, ratio and what you are driving, and we will confirm the price of the full combination for you. You can also browse our wider range of gear motors and gear reducers if you are comparing worm construction against other types.
NMRV Worm Gearbox Supplier in Lahore, Karachi and Faisalabad
MV Power Drive supplies industrial buyers across Pakistan, with strong demand from the Lahore, Faisalabad and Karachi industrial belts. Textile mills, packaging plants, food processors and sugar and cement operations make up most of the NMRV orders we handle. Tell us your city and we will confirm stock and delivery time along with the price.
How to Get an Exact NMRV Quote Today
To quote quickly and correctly, send us these details on WhatsApp:
- The NMRV size, or the motor kW if you are unsure of the size
- The ratio you need, or the output speed you are aiming for
- The input flange size or motor frame
- What the gearbox will drive and roughly how many hours a day it runs
- Quantity and delivery city
Our team will confirm the body size before you order, so you do not pay for a size that is too small or too large. Start from the NMRV series product page to see the range.
Frequently Asked Questions
How much does an NMRV gearbox cost in Pakistan?
Prices start from about Rs 28,000 for an NMRV 025 and rise to around Rs 7 lakh for an NMRV 150. Most mid range orders for sizes 063 to 090 fall between Rs 48,000 and Rs 2,30,000, depending on ratio and flange.
Why do NMRV gearbox prices vary so much between sellers?
Body size, housing material, ratio, flange and brand all change the price. Unbranded imports with no torque datasheet are much cheaper than documented units, but they are harder to size correctly and may wear faster.
What is the price of an NMRV 063 gearbox?
An NMRV 063 starts from Rs 48,000 and most units fall between Rs 48,000 and Rs 1,20,000. The exact figure depends on the ratio and the input flange you need.
Is an unbranded NMRV gearbox worth buying?
It can work for light, intermittent duty, but you should ask for a written torque rating at your ratio. For continuous duty, heavy loads or anything that stops a production line if it fails, a documented unit is the safer purchase.
How do I choose between NMRV 075 and NMRV 090?
Match the torque rating at your ratio to your load after applying a service factor. Choose the 090 for continuous heavy duty or shock loading, even when a 075 looks adequate on paper.
Get a Firm NMRV Price from MV Power Drive
Send us your size, ratio and application on WhatsApp and we will reply with a firm price and stock position for your city. If you would rather compare sizes first, read our NMRV worm gearbox size guide and then come back with your numbers.